30
HA0333T Rev B Oct 2014
Chapter 5
5.7
Graphical Control Of Motor Positions (Point and Move)
The GUI panel display can be changed to a graphical display, showing the position of
the motor channel(s). Moves to absolute positions can then be initiated by positioning
the mouse within the display and clicking.
To change the panel view to graphical view, right click in the screen and select
‘Graphical View’.
Fig. 5.7 Stepper Driver T-Cube GUI Panel - Graphical View
Consider the display shown above for an Stepper Driver T-Cube .
The right hand display shows the channel and motor unit parameters; i.e. controller
unit type and serial number, associated stage and actuator type, minimum and
maximum positions, current position, units per grid division and cursor position. All
units are displayed in real world units, either millimetres or degrees.
The left hand display shows a circle, which represents the current position of the
motor associated with the specified controller (absolute position data is displayed in
the 'Chan Pos' field).
The vertical divisions relate to the travel of the stage/actuator associated with the
Stepper Driver T-Cube (the stage/actuator is selected in the ‘APT Config’ utility). For
example, the screen shot above shows the parameters for a 6mm travel ZST motor
actuator. The graph shows 6 divisions in the X axis, which relates to 1mm of travel per
division (6mm in total).
Note
For single channel units such as the Stepper Driver T-Cube, the Channel
2 parameters are greyed out.
