Copyright © 2017 Thorlabs
8
TED4015
2 Getting Started
Inspect the shipping container for damage.
If the shipping container appears to be damaged, keep it until you have checked the contents
and you have inspected the device mechanically and electrically.
Verify that you have received the following items:
·
1 TED4015
·
1 power cord, connector according to ordering country
·
1 USB cable (A-B) 2 m
·
1 TED4015 operation manual
·
1 Series 4000 instrumentation CD (containing manuals, drivers, tools and software)
·
1 CAB4000 shielded cable to connect the TEC controller to a Thorlabs LM14S2, LDM21
or TCLDM9 laser diode mount (male17W2 mixed DSUB connector to female 9 pin DSUB
connector), rated TEC current 5A
·
1 Connector Kit CON4001 for TED4015, rated TEC current 20A:
-
1 Mixed DSUB connector type 17W2 (male) with 2 high current contacts (male)
-
1 Mixed DSUB connector type 17W2 (female) with 2 high current contacts (female)
2.1 Preparation
Connect the mains connector (R9) of the unit to the line via the provided mains cable (refer to
Figure 2, chapter
Operating elements at the rear panel
). An external thermal setup can be con-
nected to ground potential via the connector jack of the chassis ground (R7).
