3
ScienceDesk Workstation
Chapter 3 Basic Installation
3.1 Installing the Frame
1) Remove all packaging.
2) Install the frame in the location in which it is to be used.
3) Loosen the locking nuts and adjust each foot until the castors are clear of the ground (if fitted) and the frame is level –
see Fig. 3.1. Use a suitable levelling device.
Fig. 3.1 Levelling the frame
3.2 Fitting the Casters
Referring to Fig. 3.2
1) Push down the lever on each caster to lock the rotation of the wheels on the shaft.
2) Adjust the feet to raise the frame sufficiently to allow the casters to be fitted in the lower support rails.
3) Insert the threaded shaft into the locating hole, and turn the complete caster assembly to screw the shaft into the frame
4) Repeat item (3) for the remaining 3 casters.
5) Retract the feet until the casters are in contact with the ground.
6) Position the ScienceDesk as required.
7) Adjust the feet to level the frame - see Section 3.1.
Fig. 3.2 Fitting Casters
Warning
During item (2), safe lifting precautions must be observed. In particular, do not lift more than 25 kg (55 lb) per person.
Use more people or lifting apparatus as necessary. Frame weights are detailed on www.thorlabs.com.
