THORLABS PTL701, User Manual

Page: 6 / 10

6 HA0320T Rev D Nov 2016
Chapter 2
2.4 Set-up
1) Using the 24 mm wrench supplied, adjust the pad on top of one of the supports to the required height.
2) Repeat item 1) for the support diagonally opposite.
3) Repeat items (1) and (2) for the remaining two supports.
4) Using a bubble level or other suitable device, check that the work surface is level. Repeat items (1) to (3) as necessary. –
see Fig. 2.4.
Fig. 2.4 Levelling the system
5) Using the 36 mm wrench supplied, tighten the locking nuts.
Height Adjustment Nut
Locking Nut
Support Pad