© 2018 Thorlabs
4
PDAVJx
2 Getting Started
2.1 Parts List
Inspect the shipping container for damage.
If the shipping container seems to be damaged, keep it until you have inspected the contents
for completeness and tested the PDAVJx Series Detector mechanically and electrically.
Verify that you have received the following items within the package:
1. Amplified Adjustable-Gain MIR Photodetector
2. Metal Cover Cap, Protecting the Sensor
3. Power Supply (±12 V, 250 mA), Switchable 100 V, 120 V or 230 V Line Voltage, Including
Location Specific Power Adapters
4. Quick Reference Document
2.2 Preparation
Note
Prior to operation, please check if the selected line voltage range on the power supply matches
your local mains voltage.
Please follow these steps for preparation:
·
Carefully unpack the unit and accessories. If any damage is evident, do not use the unit
and contact
.
·
Mount the unit on your optical table or application. The unit has two combi thread mount-
ing holes, each compatible with both imperial 8-32 and metric M4 screws.
·
Remove the metal cover cap that protects the optical input.
·
If necessary, mount external optics, filters, or apertures.
·
Adjust the power supply to accommodate your local mains voltage (100 VAC, 120 VAC, or
230 VAC).
·
Plug the power connector cable into the power supply connection socket on the PDAVJx.
·
Plug the power supply into a 50-60 Hz, 100 VAC, 120 VAC, or 230 VAC outlet.
·
Turn the power supply on.
·
Connect the output BNC connector to your data acquisition device using a coaxial cable.
Please note that a 50
W
impedance device should be used for best RF performance.
Note
If you want to use your own power supply, contact Thorlabs for an appropriate power connector
cable.
7
