High-Intensity Fiber Light Source
Chapter 2: Safety
Page 2
CTN016972-D02
Chapter 2 Safety
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
INPUT: 200 W, Max
Line
Fuse, 5 x 20 mm
100 – 120 VAC, 50/60 Hz
3 A Quick Acting
200 – 240 VAC, 50/60 Hz
3 A Quick Acting
Caution
You are cautioned that any change or modifications not expressly approved in this
manual could void your authority to operate this equipment.
2.1. Precautions
2.1.1. Power
Sources
Before operating the product, check that the operating voltage is
identical to your local power supply. See specific descriptions for
operating voltages.
To disconnect the AC power cord, grasp the plug itself; never pull the
cord.
AC power cord must be replaced with IEC compatible cord.
2.1.2. Operation
Before connecting to fiber optic components, be sure that all power connections
are secure.
2.1.3. Cleaning
Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a
mild detergent solution. Do not use any type of abrasive pad, scouring powder, or
solvent such as alcohol or benzine.
!
!
