High Intensity Fiber Light Source
6625-D02 Rev B, February 15, 2011
Page 8
www.thorlabs.com
Part 4. Lamp Replacement
Lamp Replacement Instructions
1.
To replace the lamp, shut off the power and remove the power cord from the
AC outlet. To disconnect the AC power cord, grasp the plug itself; never pull
the cord.
2.
Located on the lamp access panel, manually loosen the front panel fasteners.
3.
With front panel released, remove the lamp module from the unit. Use caution;
fan blades are accessible while lamp module is removed.
4.
Allow sufficient time for the unit to cool. CAUTION: Lamp and surfaces may
be extremely hot!
5.
Remove the lamp from the socket and place in a safe area.
6.
Insert the replacement lamp into the socket; pressing firmly to ensure that pins
are fully seated.
7.
Close the access panel.
8.
Secure the lamp access panel by manually tightening the front panel fasteners.
Lamp
Socket
Lamp
Socket
Lamp
Access Panel
Front Panel
Fasteners (2x)
Figure 3: Lamp Access Diagram
On Safety
Should any solid object or liquid fall into the assembly while access panel is open, have it
checked by qualified personnel before operating.
