24
Chapter 6
Software Reference
6.1
Introduction
This chapter gives an explanation of the parameters and settings accessed from the
APT software running on a PC.
6.2
GUI Panel
The following screen shot shows the graphical user interface (GUI) d isplayed when
accessing the filter flipper using the APTUser utility.
Fig. 6.1 Filter Flipper Software GUI
Position 1
- used to initiate a move to position 1. When the button is clicked, the
flipper is driven to the position at the speed entered in the ‘Transit Time’ field in the
'Settings' panel (see Section 6.3.). When at position, the LED in the button is lit.
Note
The serial number of the MFF filter flipper associated with the GUI panel,
the APT server version number, and the version number (in brackets) of
the embedded software running on the unit, are displayed in the top right
hand corner. This information should always be provided when
requesting customer support.
