THORLABS LNR50 Series, Manual

Page: 10 / 28

8
Getting Started
3.1.1 Drives
Stages are supplied pre-configured with either manual or motor drives. However,
various motorized drives and piezo drives are available, which can easily be fitter
later, as the application needs change – see Table 3.1, Fig. 3.2, Fig. 3.3 and Section
3.1.2..
Note . The DRV013 and DRV014 trapezoidal stepper motor drives must be used in
conjunction with the BSC101, BSC102, BSC103 or MST601 stepper motor controllers.
The DRV414 DC motor drives should be used with a Thorlabs BDC001 DC motor
controller.
.
Fig. 3.2 A typical stepper motor drive
Table 3.1 Drives
Drives Type
Travel
(mm)
Resolution
(µm)
Product Number
Trapezoidal stepper motor 25.0 0.05 DRV013
Trapezoidal stepper motor 50.0 0.05 DRV014
DC servo motor 50.0 0.3 DRV414
D
RV
01
4