LFE1220-US, -EU, and -UK Laminar Flow Enclosures
Chapter 3: Installation
Rev A August 2020
Page 11
6. Fit the second Longitudinal Filter Support:
Figure 6 Assembly of Longitudinal and Lateral Filter Supports – Step 6
7. To assemble construction rails together, the low profile screw heads are tightened inside the T-slots, clamping
the parts together. To access the screw heads for tightening, through holes have been drilled in the construction
rails, and the provided 4mm T-handle hex driver (AL) is passed through the holes. To give the correct tightness,
the screws should be turned between ¾ - 1 rotation
For this step
: Using the 4mm T-handle hex driver (AL) tighten the 8 screws. Ensure the top faces of the
construction rails are flush to each other.
Figure 7 Assembly of Longitudinal and Lateral Filter Supports – Step 7
Summary of Contents for LFE1220-EU
Page 60: ...www thorlabs com ...
