THORLABS IP250-BV, User Manual

Page: 12 / 16

IP250-BV Blue Laser Diode Controller Chapter 3: Specifications
Page 10 10713-D02
Figure 3 Mechanical Drawing
Pin Description Pin Description
J1-1 +12 VDC In J5-1 TP Ground
J1-2 Common J5-2 ILIM Test Point (TP)
J1-3 -12 VDC In J5-3 ILIM Adjust
J2-1 LDA(+) or LDC(-) J5-4 IALARM
J2-2 Ground LDC(+) or LDA(-) J5-5 PLIM Test Point (TP)
J2-3 PD Cathode J5-6 PLIM Adjust
J2-4 PD Anode J5-7 Alarm
J3 0 – 10 VDC Modulate In J5-8 PMON Test Point (TP)
J4-1 Enable J5-9 P/I Adjust
J4-2 Ground J5-10 Enable
J4-3 Keylock J5-11 IMON Test Point (TP)
J4-4 Ground J5-12 2.5 V
ref
J4-5 Inhibit JMP3-1 Ground
J4-6 Ground JMP3-2 PD Cathode
0.150"
(3.81 mm)
0.150"
(3.81 mm)
0.150"
(3.81 mm)
0.150"
(3.81 mm)
2.500"
(63.50 mm)
5.000"
(127.0 mm)
1.125"
(28.58 mm)
0.250"
(6.36 mm)
0.25" Hex Standoff, 4 Places
#4-40 Femail Thread
0.187" (4.75 mm) Deep