3 Operating the DC3100
DC3100
20
Figure 22
The Windows Logo Test
3.2.1.4
Driver Installation
The necessary drivers for the DC3100 - FLIM LED Driver is automatically copied to
the system folder during the installation of the DC3100 remote application.
Attention:
The following procedure will only be necessary for Windows XP/2000
©®
.
On the first connection of a device the 'Found New Hardware Wizard' will start to
install the new device. Depending on the configuration of your system you might be
asked if you want to connect to 'Windows Update to search for Software'.
First the 'USB to DC3100 Bridge' will be installed:
1. Please select 'No, not this time' and click 'Next' to continue.
2. Select 'Install the software automatically' and click 'Next' to continue.
3. A message appears informing that the software has failed the Windows logo test.
Click 'Continue Anyway'.
4. Finalize the installation by clicking 'Finish'.
After this first installation the 'DC3100 - FLIM LED Driver' will be installed. Repeat
step 1 to 4.
3.2.2
Operating the DC3100 by the Remote Application
The DC3100 remote application can be used to operate a DC3100 - FLIM LED
Driver via the PC.
Every setting made will automatically be used by the device. The parameters are
updated/synchronized once every second.
