21
HA0114T Rev 10 May 2019
Chapter 3
3.9.3 Display tab
Fig. 3.7 NanoTrak Settings panel - NanoTrak Screen Tab
Sometimes, it may be useful to explore the area of interest by manually
repositioning the two piezos driven by the NanoTrak. If desired, the NanoTrak
circle can be positioned by using the mouse. This feature allows manual
repositioning of the piezos, e.g. to enable investigation of the region of interest to
look for side peaks, artifacts etc.
The circle can be moved either by click and drag, or by moving an incremental
distances per mouse click.
Note. The circle can be moved in both Latch and Tracking modes.
Display Units
- The circle position window (see Section 3.8.) is displayed by right
clicking in the NanoTrak screen, and shows the current position of the circle, in NT
Units or microns, whichever is selected.
Fig. 3.8 Circle Position Window
