THORENS TD 190, Instruction Manual

Page: 4 / 9

TD 190_E 4
electronic-controlled DC motor
100 – 240 V (AC)
50 / 60 Hz
1,5 W
33
1/3
, 45 , 78 U / min
± 0,07/0,04 %
Ø 304 mm
46 dB
72 dB
211 mm
26°
19,5 mm
0,15° / cm Rad.
rot R right channel Ortofon
grün RG right channel ground OMB 10
blau GL left channel ground
weiß L left channel
Nadel 10
18 x 8 µm
Nadel 78
65 µm
15 mN
10 Hz – 22000 Hz
4 mV / 5 cms -1
/ 1 kHz
80 µm
2,5 g
ca. 160 pF
440 x 119 x 360
Technical Data
Measured values = typical values
Belt drive
Mains voltage
(Mains set)
Wow and flutter (DIN/WRMS)
Platter
Line frequency
Power requirement
Platter speeds
Signal-to-noise ratio (DIN 45 500)
Rumble unweighted signal-to-noise ratio
Rumble weightes signal-to noise ratio
Effective tonearm length
Offset angle
Overhang
Tangential tracking error
Cartridge
HiFi DIN 45 500
Diamant stylus
elliptical
Diamant stylus for 78 U / min
conical
Tracking force
Frequency range
Tonearm leads and audio-cables
Dimensions (W x H x D)
(mm)
Output
Tracking capability (315 Hz)
Cartridge weight
Total capacitance