6
Before you insert the plug into the wall socket make sure that the voltage and
The frequency shown in the rating plate inside the appliance corresponds to
Your electricity supply. We recommend that this appliance is connected to the
mains supply via a suitable switched and fused socket in a readily accessible
position.
Should the mains lead of the appliance become damaged or should it need
Replacing at any time, it must be replaced by a special purpose made mains
Lead which can only be obtained from Shomar Ltd.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted plug is not suitable for your socket, then the plug should be removed
and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with
bared cord could cause a shock hazard if inserted into a socket. The plug on this
appliance incorporates a 13 A fuse. Should the fuse need to be a fuse of the same
rating must be used. Ensure that the fuse cover is refitted.
1.
Install the refrigerator on a flat surface in order to prevent vibration and
noise.
2.
Choose a dry well-ventilated place. A space of no less than 10cm must be
left around the refrigerator.
3.
Minimum space in the room where the refrigerator is being installed is
than 10 cubic metres.
4.
Choose a location where there is no heat source. Keep the refrigerator
away from direct sunlight, oven etc.
Installation Instructions
Electrical Requirements
