7
NEVER DISASSEMBLE
THE TUBE WITHOUT GOOD
REASON!
Due to the sealing between electronic
compartment and LED, the field exchange
of the tube is not as easy as with the old
lamps which provided sufficient space for air
compression.
Disconnect every time the lighthead from the
power source when doing maintanance works
The Head and the Tube will be very hot after
usage. Be careful !
E/O cords need extensive care. Always (!)
rinse the lamp/the battery canister thoroughly
with fresh water after the use in seawater.
Additionally, use DeoxIT® Gold G Series
protective varnish, if needed.
If not rinsed and cleaned with fresh water
immediately after the dive, E/O cords corrode
already after a few dives. This leads to loose
connections and the cable must be replaced by
a new one.
Do not kink or compress the cable. Do not carry
or pull the lamp or the battery canister with the
cable. E/O cords are sensitive. A cable break is
not a defect covered by warranty, but natural
wear and tear.
The light will dim down automatically to avoid
overheating to protect the lighthead. After the
LED has cooled down it is possible to dim up
the light again
Be careful while handling the light. The light
may break if it fells down.
Make sure that the canister and the battery is
suitable for the use with the Thor lighthead. No
guarantee or waranty will be promised or given
for damages on the battery while using the
Thor lighthead.
Choose at every time the right light power
by using the Dimmer which suits wellt o the
surroundig dive conditions.