blue.
•
In coastal areas, a slightly orange flame is unavoidable due to salt air.
Appliance not level
•
Place oven rack in center of oven. Place a level on the oven rack. Contact installing agent if
rack and cabinet cutout flooring are not level.
•
Kitchen cabinet misalignment may make oven appear to be not level. Be sure cabinets are
square and level. Contact cabinet maker to correct problem.
Poor baking results
•
Many factors affect baking results. See Baking for hints, causes and corrections.
Entire oven does not operate
•
When the unit is first plugged in, or when the power supply to the range has been interrupted,
the indicator lights will flash and the control will beep. To stop the lights from flashing, turn the
selector control knob to BAKE and back to OFF. The oven cannot be used until this step is
followed.
•
Be sure electrical cord is securely connected into the electrical junction box.
•
Cord/plug is not installed and/or connected. Cord is not supplied with oven. Contact a
qualified servicer.
•
Service wiring not complete. Contact a qualified servicer.
•
Power outage. Check house lights to be sure. Call your local electric company.
•
Short in cord/plug. Replace cord/plug.
•
Controls are not set properly. See instructions under Setting Oven Controls to set the controls.
•
House fuse has blown or circuit breaker has tripped immediately following installation. House
fuse may not be fully engaged. Check fuse and screw or engage circuit breaker securely.
•
House fuse has blown or circuit breaker has tripped after the oven has been installed and
previously operating. Contact a qualified servicer.
Summary of Contents for LRG
Page 1: ...LRG Professional Gas Range User Manual...
Page 2: ......
Page 38: ...LRG3001U LRG3601U LRG4801U...
Page 43: ......