H-PCKT-MOD
Thor Fiber 2018 Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
HDMI-Modulator J.83B/ATSC/DVB-T/ISDB-T Button Layout
HDMI
HDMI Signal input
CVBS/ CC
CVBS or Signal input
DC
Power Supply 12V DC 1A
Ethernet
RJ45 connector for service
Micro USB
PC connector for service & update
RF Out
RF Signal output
RF In
RF Signal loop-through input
Power LED
Lit when device is powered on
HDMI LED
Lit when HDMI is in operation
CVBS LED
Lit when CVBS is in operation
Control buttons for menu functions
OK/Return
Enter & Escape buttons for menu
Safety Instructions
Please make sure the DC adaptor is securely plugged in before operation of the unit, if
there are any tears or obstructions to the power supply, do not turn on PCKT-MOD
Install in a dust-free, dry environment, vapors, water or moisture present. Protect the unit
from direct sunlight so it doesn’t overheat. Do not install near any heat sources or at ambient
temperatures >50℃. Make sure the unit is in a well ventilated and the ventilation slots are not
obstructed!
To avoid any short circuits that are excluded from Thor’s warranty are: damage caused by
improper handling, external influences, liquids, incorrect connection or incorrect operation as
well as damage due to blunt force and overvoltage.
Follow any relevant standards, regulations and guidelines for installation and always use
proper care when handling the units to ensure its life expectancy
All manuals and user guides at all-guides.com
