H-8ATSC-IP
Tel: (800) 521-8467
Email: [email protected] http://www.thorbroadcast.com
3.2.1 Alarm Status
After entering “1 Alarm Status”, you can check the Alarm Count status in this submenu:
3.2.2 Input Setting
After entering “Input Setting”, it will display these submenus:
Under this interface, you can use UP or DOWN key to choose channel, and press ENTER to go
to the relevant submenu for setting parameters.
3.2.2.1 Tuner 1 Setting
This section will take Tuner 1 to illustrate the configuration of parameters.
Pressing ENTER button, enter into the submenu as shown below:
From here you can press Enter once after the submenu 1.1 Frequency is loaded, this will
produce an image similar to the box below indicating the frequency in MHz. Simply use the UP
DOWN LEFT RIGHT buttons to change the variables and press Enter to save your changes. Always
follow up by pressing lock to permanently save those changes.
3.2.2.1 Tuner 2-8 Settings
Absolutely the same setting sequence is repeated just as shown in Tuner Setting 1.1
Alarm Status
Alarm count 0
►2.1 Tuner 1 Setting
2.2 Tuner 2 Setting
2.3 Tuner 3 Setting
2.4 Tuner 4 Setting
►2.5 Tuner 5 Setting
2.6 Tuner 6 Setting
2.7 Tuner 7 Setting
2.8 Tuner 8 Setting
►1.1 Frequency
►1.1 Frequency
057.000 MHz
