F-EDFA-XX
Tel: (800) 521-8467 Email: [email protected] http://www.thorbroadcast.com
Low +5V DC power supply alarm
xxx= HIGH:
High +5V DC power supply alarm
Xxx= HIHIGH:
Very high +5V DC power supply alarm
-5V Status: xxx
xxx= LOLOW:
Very low -5V DC power supply alarm
xxx= LOW:
Low -5V DC power supply alarm
xxx= HIGH:
High -5V DC power supply alarm
Xxx= HIHIGH:
Very high -5V DC power supply alarm
Device Temper: xxx
xxx= LOLOW:
Very low chassis temperature alarm
xxx= LOW:
Low chassis temperature alarm
xxx= HIGH:
High chassis temperature alarm
xxx= HIHIGH:
Very high chassis temperature alarm
6.Communication Setup Descriptions
6.1 Communication Interface Description
1)
RS232 communication interface adopts DB9 standard connector, the pin definitions as follow:
The serial communication uses the standard NRZ form, 1 starts bit, 8 data bits, 1 stop bit and the baud rate is
38400.
2)
LAN communication interface adopts RJ45 standard connector, the pin definitions as follow:
1
：
No Connect
2
：
TX
3
：
RX
4
：
No Connect
5
：
GND
6
：
No Connect
7
：
No Connect
8
：
No Connect
9
：
No Connect
1
：
TX+
2
：
TX-
3
：
RX+
4
：
No Connect
5
：
No Connect
6
：
RX-
7
：
No Connect
8
：
No Connect
