6
Receiver
Receiver
AUDIO OUT
L
R
DC 12V
VIDEO OUT
6
TV2
5
7
1
. Place the receiver (5) on, or near, the second television set.
2
. Connect the receiver (5) to the second television set using the lead (6) following
the same instructions as for the transmitter.
3
. Extend the antenna on the receiver (5) and orient it toward the main TV set (TV1).
4
. Raise and extend the telescopic aerial of the receiver (5).
5
. Fit the mains supply lead (7) to the receiver and plug it into a 220/240 V ~ 50 Hz
mains power supply.
! THE ANTENNA
allows you to transmit and receive audio and video signals over a
maximum range of 30 meters in free air environments. Inside a typical lodgment the range
will be less because of signal attenuation by building material absorption.
! THE TELESCOPIC AERIAL
permits the control of the unit whose pictures you wish to
see in the room containing the second television set (TV2).
! THE POWER SUPPLY
plug fitted to the transmitter (1) is not the same as the one fitted
to the receiver (7).
Installation of receiver
220/240V ~ 50 Hz
VS 650 U
VS 650
VS 650 E
VS650 22/02/02 16:36 Page 6
