Drilling holes in a furniture door (not supplied)
Align the supplied drilling template on a furniture door and drill the holes for the two hinges
and the spacers.
GB
1
6
-2
2
m
m
1
2
m
m
35mm
1
2
m
m
2mm
- The hole diameter for the hinges is 35mm and should be drilled to a depth of 12mm. The furniture
door thickness is usually 16-22mm. Care must be taken to ensure that you do not drill through the
door.
- The hole diameter for the spacers is 2mm.
The furniture door can be hinged on either the right or left side.
Mounting the hinges and spacers on the furniture door
Insert the hinges into the holes and fix them to the furniture door using 4 type-A screws.
Fix the spacers to the furniture door using 4 type-A screws.
31
Downloaded from www.vandenborre.be
