6
Instructions
1-Add water into the carbonating bottle; do not exceed the fill line.
2-Install the carbonating bottle onto the Soda Maker; rotate it
counterclockwise to fix it into place. Confirm that the carbonating bottle
is properly installed before carbonating. Caution, do not carbonate
under the following conditions:
1.
Empty carbonating bottle, or not filled up to the fill line.
2.
Carbonating bottle not installed in place.
3.
Carbonating bottle not installed.
3-Press and hold down the carbonating button; press for approximately
0.5 seconds each time.
Caution: Do not press the carbonating button too hard or too long; this
will cause the water and bubbles to overflow and cause damage to the
machine.
4-Wait for 5-10 seconds until the CO2 and water has fully mixed; press
the pressure release button on the back to release the excessive
carbon dioxide.
5-Rotate the carbonating bottle clockwise to remove it; start enjoying
refreshing sparkling water. Different flavoring syrups can also be added
according to personal preferences.
