ASSEMBLY
1. Remove the rotating part (2)
in the direction of clockwise and
nut counterclockwise (4), then
remove the two pieces.
2. Place the back grill (5) with
the handle up.
3. Firmly tighten the plastic nut
(4) for fixing the grill.
4. Place the blade (3) on the rod
(6) until it contacts the retaining
pin.
5. The rotatable screw (2) on the
motor shaft in the opposite direction of clockwise.
6. Unscrew the screw on one of the grills. Place the front grill (1) on the back grill (5), the small holes at
the bottom of the grills must match in order to pass the screw. Set the grids using the 3 clips then tighten
the screw.
7. Insert the fan (11) in the base (12), and screw with the nut (13).
OPERATING INSTRUCTIONS
1. To activate or stop oscillation, press the button or pull (7).
2. To adjust the path of the fresh air, tilt upwardly or downwardly, the ventilation grill.
3. You can adjust the speed with the speed buttons:
0: Off - 1: slow - 2: Medium - 3: fast
4. Plug the power cord into a suitable power socket.
MAINTENANCE
1.
Always disconnect the appliance from the mains by switching it off and removing the plug from
the power outlet before cleaning.
2.
It is advisable to use a neutral detergent and a soft cloth and to rub dry. Do not use solvents, acidic
detergents, petrol or alcohol etc. to clean the plastic components, as these could be deformed or
damaged.
3.
Do not allow water to penetrate the motor during cleaning.
WARRANTY
This product has 1 year warranty
GB-4
