Loosen the nut (5) of the motor (8). Firmly mount the rear
grille (6) on the motor by matching 3 mounting pads.
Tighten the nut (5) on the back grid so as to block the grill
against the motor.
Mount the fan blades (4) on the axis (7). Firmly secure
them with the reversed nut (3). At this point, the blades
should turn freely without touching the nut of the rear
grille.
Loosen the locking strapping clip (2a) Put the front grille
on the rear grille and tighten the locking screw.
OPERATING INSTRUCTIONS
Push on the switch of the control panel according to your desired fan speed:
• « 1 » switch low speed
• « 2 » switch mid speed
• « 3 » switch high speed
• « 0 » switch to switch off the fan.
Turn the timer switch to adjust the time before the fan stop automatically “OFF”.
Or turn the timer switch to “ON” to deactivate the timer.
MAINTENANCE
Warning : Always unplug the appliance before cleaning.
1. Always disconnect the appliance from the mains by switching it off and removing the plug from the power
outlet before cleaning.
2. To clean the outer surface of the appliance, use a lightly damp cloth. Then, dry it thoroughly with a soft,
dry cloth before using again.
3.
Do not allow water to penetrate the motor during cleaning.
4.
Do not reconnect the unit until it is completely dry.
SPECIFICATIONS TECHNIQUES :
Model n°
THVEL450K
Power supply
220-240V~50Hz
Power
55 W
Classe II
GB-5
