the wall using a drill adapted to the diameter
of pegs. Insert the pegs into the holes, then
screw securely wall mount bracket onto the
wall. (Figure 3)
4. Place the heater against bracket (Figure 4):
A : Fix the heater on the 2 hooks that are
downwards.
B : Pull the heater upwards whilst keeping it in
the 2 lower hooks.
C : Fix the heater on the 2 hooks that are
upwards.
D : Pull the heater down.
5. Slide the metal slice into the hole, and
fasten the screw to lock the wall mount
bracket (Figure 5).
INSTALLATION IN THE BATHROOM
Warning: this product shall be used in volume
GB-6
