EN
-10
and use the small pusher (10) for easier operation.
If the food shape is big such as potato
,
please open the chute cover,
put the food in, close the c over
,
and then use the big pusher (9)
with small pusher (10) locked on it for operation
.
DO NOT be violent while pushing the ingredients in feed chute by
pusher. It is best to cut a large food into smaller pieces to fit more
easily into the chute.
It is recommended to lower the speed when slicing soft foods to avoid
tampering.
-
Blender jar (20-21)
Standard processing time is l minute.
Prepare the ingredients and put them in the blender jar (20), mount
the blender cover (21)
well.
Position the blender jar (20. 21) on motor base; turn clockwise to make
it fixed firmly. Aware that
switch
should be in
"0"
speed, plug in and use pulse
2-3 times as pre-blending. Then choose
"1"
or
"2" speed
for processing.
During
the operation,
you can
take out the small lid on blender cover (21)
and add
water
or any other ingredients
you
want
through the feeding hole.
DO NOT open the blender cover (21) for adding ingredients during operation!
Always add in
some water when
using the blender.
Tips and Warning
Please always operate the appliance according to above instruction
manual to avoid reducing the product life due to
working
overtime.
INSTALLATION AND MAINTENANCE
-
Installation
1. Position the motor base (2) on a flat and dry board.
2.
Position the processing bowl (3) onto motor base, turn
clockwise
to make
it fixed firmly.
3.
Place driving
shaft
(4) onto the rotor inside the bowl, seat it
vertically.
4.
Open the blade box (l l) of the motor base and take the blade
you want.
For example,
when
using the chopping blade (13) or dough
blade (12), just seat it in driving shaft (4);
when
using
slicing
or