8
with all cards. Should a compatibility problem arise, please try to use another Micro
SD card, with a lower capacity (such as 4GB as total capacity).
2.2 Battery
2.2.1 Battery Installation
Only the batteries and accessories provided with this package are suitable to your device.
Keep your device in dry condition if you will not use it for a long time. Do not keep your
device exposure to sunlight.
-
Press the upper part of the back cover and slide it downward to remove the back cover.
-
Observe the battery contacts and match the contacts to the corresponding part in the
battery compartment. Put the other side into the cabin and push the battery till it is
completely fitted.
-
Slide the back cover into its place firmly.
2.2.2 Battery Charging
The new battery is not fully charged. You need to install and charge the battery before using
the device. In general conditions, the new battery will work under best condition after
several times of charge and discharge.
-
Connect the plug of the charger to the charger connector of the device.
-
Connect the other plug of the charger to the proper power supply socket.
-
When the battery icon is full and stop scrolling, which means the battery charging is
completed, please pull out the plug.
Note:
To ensure normal operation of the phone, use only the charger supplied in this
package.
2.2.3 Setting up your operator to activate MMS and WAP functions
First time you are using this mobile phone, or if you change to another operator, you will
need to select your operator manually in order to activate MMS (Multimedia Messages)
and WAP Internet services.
