THOMSON ST716v5, Installation And Setup Manual

Page: 14 / 52

E-DOC-CTC-20060911-0057 v1.0
Chapter 2
Basic Installation
8
2.2.1 Guided Installation
Introduction
On the CD, a Quick-Install Wizard is provided that will guide you through the first installation and setup of
your Thomson Gateway.
The Quick-Install Wizard will:
>
Provide important safety and regulatory information.
>
Show you how to make the necessary connections to your Thomson Gateway.
>
Show you how to turn on your device.
>
Prepare you to smoothly run the Thomson Gateway Home Install Wizard.
The subsequent Home Install Wizard will then prepare your Thomson Gateway and your local computer(s) to
connect to the Internet.
The Home Install Wizard will:
>
Guide you through connecting your computer(s) to your Thomson Gateway.
>
Prepare the Thomson Gateway to connect to the Internet.
Connecting the cables: wait!
Do not plug in any cables until you are prompted to do so by the Quick-Install Wizard and/or the Home Install
Wizard.
Starting the CD for the first time
To start the Thomson Gateway Setup:
1 Insert the Setup CD into your computer's CD-ROM or DVD-ROM drive.
„
Microsoft Windows: The CD should autostart.
„
Mac OS X: Double-click Menu in the window with the content of the CD.
2 Select the language of your choice and click OK .
3 The procedure continues with the Quick-Install Wizard.
Proceed with “ Quick-Install Wizard” on page 8 .
Quick-Install Wizard
The Quick-Install Wizard guides you through the first setup of your Thomson Gateway.
1 On the Welcome page, click Next to continue.
!
You need administrative rights to run the applications on the Setup CD on a Microsoft Windows
2000 or XP operating system, or Mac OS X computer.
!
If not, see ”The Thomson Gateway CD does not start automatically” on page 37 .
!
If you ran the CD on this computer before, the Quick-Install Wizard is not shown; the CD menu
appears instead (see
“2.3 The Setup CD” on page 18 for more information).