VoIP Business Phone Administrator Manual
Copyright ©2005 THOMSON All rights reserved.
.
[Group listening]
-
Pick up the handset and put it aside to place a call.
-
Press the
[SPKR]
key on the phone, to activate the group listening.
-
To put an end to the group listening press again the
[SPKR]
key
2.2
Answering a Call
[Using Handset]
-
On hearing the ring tone, you will see the Caller ID (display name) on the LCD screen.
You may then take the call or refuse it.
-
Pick up the handset
t
o accept the call
-
Hang-up the handset again to end the call.
-
The corresponding LCD screen messages are as follows:
LCD Screen
Description of Action
XXXX
Ringing…
When a call is coming, the username (Caller ID) is
displayed on the LCD screen.
XXXX
Connected
When you pick up the handset, the call will be established
and you can start talking.
2.3
Adjusting the Voice Volume
The following keys are used:
[vol-]
[vol+]
CANCEL
[Adjusting Voice Volume with the idle State]
-
There is a simple way for users to adjust the local tone volume level of speaker. Under
idle state, let the Handset still on the cradle and press the
[vol-]
or
[vol+]
keys to
decrease or increase the local tone volume of speaker. It will also affect the ringer tone
output volume levels.
-
The corresponding LCD screen message is as follows:
LCD Screen
Description of Action
Volume: 4
Press the corresponding soft keys to select:
[vol-]:
to decrease the volume.
[vol+]:
to increase the volume.
Current Ringer volume value: say “4”, is increased and
displayed on the screen.
[C]:
to return to idle state.
- Page 17 -
Summary of Contents for ST2020
Page 1: ...Administrator Manual ...
