manualshive.com logo in svg

THOMSON SpeedTouch 516, Reference Manual

Share
Download
THOMSON SpeedTouch 516 Reference Manual Download Page 253

Eth Commands

E-DOC-CTC-20060414-0002 v1.0

233

Eth Commands

Introduction

This chapter describes the commands of the 

eth

 command group.

Contents

This chapter covers the following commands:

eth ifadd 

Create a new ETH interface.

235

eth ifattach 

Attach an ETH interface.

236

eth ifconfig 

Modify an ETH interface.

237

eth ifdelete 

Delete an ETH interface.

238

eth ifdetach 

Detach an ETH interface.

239

eth iflist 

Display the ETH interfaces.

240

eth flush 

Flush all the ETH interfaces.

241

eth bridge clear 

Clear the bridge statistics.

242

eth bridge config 

Modify/display the bridge configuration settings.

243

eth bridge dynvlan actlist 

Display the active MAC entries for the dynamic VLAN membership.

244

eth bridge dynvlan add 

Add a dynamic VLAN membership entry.

245

eth bridge dynvlan config 

Modify the dynamic VLAN membership configuration.

246

eth bridge dynvlan delete 

Delete a dynamic VLAN membership entry.

247

eth bridge dynvlan flush 

Flush all dynamic VLAN membership entries.

248

eth bridge dynvlan list 

Delete a dynamic VLAN membership entry.

247

eth bridge flush 

Flush bridge interfaces and parameters.

250

eth bridge ifadd 

Create a new bridge interface.

251

eth bridge ifattach 

Attach a bridge interface.

252

eth bridge ifconfig 

Modify a bridge interface configuration.

253

eth bridge ifdelete 

Delete a bridge interface.

255

eth bridge ifdetach 

Detach a bridge interface.

256

eth bridge iflist 

Display the current bridge interfaces.

257

eth bridge macadd 

Add a static MAC address to a bridge interface.

258

eth bridge macdelete 

Remove a MAC address from the filtering database.

259

eth bridge maclist 

Display the MAC address database.

260

eth bridge rule add 

Add a new constraint to the VLAN learning system.

264

eth bridge rule delete 

Delete a constraint from the VLAN learning system.

265

eth bridge rule flush 

Flush all constraints from the VLAN learning system.

266

eth bridge rule list 

Display all constraints from the VLAN learning system.

267

eth bridge vlan ifadd 

Add a bridge interface to a VLAN.

268

eth bridge vlan ifconfig 

Modify a bridge interface from a VLAN.

269

Summary of Contents for SpeedTouch 516







































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands