THOMSON SpeedTouch 350, Setup And User Manual, Page: 43 / 58

4 Support
E-DOC-CTC-20031204-0011 v2.0
41
4.1.2 Operating System Independent SpeedTouch™
Configuration Setup
Supported Systems
As the SpeedTouch™ is OS-independent, this configuration setup can be used by any
computer system
Prerequisites
Make sure that:
•
The SpeedTouch™ device is correctly set up and turned on as described in
“1.2 Setting up your SpeedTouch™” on page 9 .
•
The SpeedTouch™ device is in its default configuration state.
See “4.3 Resetting the SpeedTouch™” on page 52 for resetting your device.
•
The SpeedTouch™ and your computer share the same IP subnet (10.0.0.0/24).
By default the SpeedTouch™ has a local IP address 10.0.0.138 . To be able to
access the web pages, your computer needs to be configured for an IP address in
the same subnet, e.g. 10.0.0.1.
•
Your web browser is able to run Java scripts.
SpeedTouch™
Easy Setup
SpeedTouch™ Easy Setup consists of two parts:
•
Configuration of the SpeedTouch™
•
Additional configuration (if needed)