SpeedTouch 210i
30
LAN-to-LAN Access
The following sections are based on the network layout above to describe how to set up a
LAN-to-LAN profile to connect two private networks. In the above network layout, the
private network of the head office is 192.168.1.0/24 and the off-site branch office
network is 192.168.2.0/24.
Before you begin to setup a LAN-to-LAN profile for each network, you should gather the
information shown in the following table.
Head Office
Branch Office
Network ID
192.168.1.0/24
192.168.2.0/24
Router IP address/netmask
192.168.1/24
192.168.2.1/24
Assigned IP for dial-in
connection
192.168.1.200
192.168.2.200
Access Account
UN: head; PW: head
UN: branch; PW: branch
ISDN line number
1000
2000
Callback function
Disable
Disable
Activating the Remote Dial-In Capability
In the
Quick Setup
group of the
Setup Main Menu
, click
Remote Dial-In
Access Setup
to enter the setup page. See the Remote Dial-In Access section earlier in
this chapter for a full explanation of the fields on this page.
Head Office:
SpeedTouch 210i
SpeedTouch 210i
SpeedTouch 210i
Summary of Contents for SpeedTouch 210i
Page 1: ...User s Guide...
Page 56: ...SpeedTouch 210i 52...
