19
4. Use <UP/DOWN> to select DETECT DIGIT in order to enter the detection string then press <OK>. The
last stored number (if available) is displayed. Enter detection string (maximum 5 digits) and press OK to
confirm.
5. To enter a prefix, press <DOWN> to select PREFIX and press <OK>. The last prefix (if available)
appears on screen. Enter the prefix (maximum 10 digits) and press OK to confirm. You will hear a
confirmation beep tone.
Notes:
- If you have not input detection string (by leaving the field empty), the prefix will be automatically added to
the beginning of the pre-dial number after you press the
key.
- The prefix will not added to phone numbers starting with “*”, “#” or “P”.
Changing the recall time
1. Press <MENU> and then use <UP/DOWN> to select ADVANCED SET.
2. Press <OK> and then use <UP/DOWN> to select RECAL TIME.
3. Press <OK> and then use <UP/DOWN> to select the new flash time: Short, Medium or Long.
4. Press <OK> to confirm.
Changing the dialing mode
1. Press <MENU> and then use <UP/DOWN> to select ADVANCED SET.
2. Press <OK> and then use <UP/DOWN> to select DIAL MODE.
3. Press <OK> and then use <UP/DOWN> to select TONE or PAUSE.
4. Press <OK> to confirm.
Deactivating the first ring
You may deactivate first ring of incoming calls so that the caller’s name and number are shown
as soon as the phone rings.
1. Press <MENU> and then use <UP/DOWN> to select ADVANCED SET.
2. Press <OK> and then use <UP/DOWN> to select FIRST RING.
3. Press <OK> and then use <UP/DOWN> to select turn the first ring ON or OFF.
4. Press <OK> to confirm.
Eco Mode
This feature saves power consumption and reduces radio waves emission.
The transmission range will be reduced in eco mode.