You can program up to 24 tracks.
To play your program again, press play.
To add/edit tracks to the program, go to
stop mode ; press and hold
P
button
again. Refer to step 2 of the above
paragraph.
To check the program,
press
PLAY/PAUSE
and
To cancel your program, press and hold
the mode key when you are in the stop
mode.
ERASE
will appear in the display.
The program will be automatically
canceled.
To exit program mode, remove P from the
display by pressing
STOP
then
P
.
Random tracks play
(MIX for Thomson &
SHUFFLE for RCA)
1. Listen press
PLAY
key.
To cancel this function,
PAUSE
Suspend the playback by pressing
PLAY/PAUSE button.
The minutes and
secondes flash when interrupted
STOP
Stop playback by pressing
STOP button.
The player switches off automatically
after 10 seconds. Press twice stop key to
stop your CD player.
REMAIN TIME
Display remaining time in the play mode,
at play mode Press display information
about CD playing time.
THE DISPLAY
1. Repeat
entire disc.
2. Repeat
current track.
3.
RANDOM
TRACKS
4.
PROGRAM
5. Is displayed when the control button is
on
HOLD
position.
6. Is displayed when Bass Boost is
ON.
Listening to a Compact Disc
1. Slide the
OPEN switch
to the right
to open the door. Insert a disc and
press lightly on the centre to lock. Close
the door. Press PLAY/PAUSE button. Rd
DISC
will appear in the display. Then,
the total number of tracks
and time of the CD will
be displayed. If the
disc compartment
is empty or the
disc cannot be
played, No Disc
will appear in
the display.
2. Slide CONTROL
switch to
HOLD
position to lock
the button to
avoid accidental
activation of
unwanted functions.
You can also change tracks or quickly
listen to part of a track by pressing down
or holding
Repeating
You can replay the entire CD or one
track as many times as you wish as well
as listen to the beginning of each track
for 10 seconds.
Press
MODE
successively to
1. Replay the entire CD .
2. Replay the current track.
3. Replay the beginning of each track
for 10 seconds.
(The number of the track being played
will be displayed and SCAN will appear.)
4. Press again to the function
de-select.
Program
This function lets
you listen to the
tracks you
selected in the
order you want.
The CD player
must be in Stop
mode.
1. Press
P button
. P will
appear in the display.
2. Select the track to store by pressing
& press
P
again to con-
firm.
3. Return to step 2 to store other tracks.
4. Press PLAY/PAUSE button to listen to
your programming.
Note : To prevent excessive battery
consumption, the unit switches off
automatically in all modes after 30s if
no key has been activated.
6
5
THE CD PLAYER
THE CD PLAYER
EN
EN
or
or
pro
gram
mable compact disc
pla
ye
r
b
a
ss
boost
m
ode
P
pr
og
•
d
is
p
la
y
second
track
minute
• 1 bit d/a convertor •
BASS BOOST
P
2. Press
De-select
BASS BOOST
P
1
2
3
4 5
6
RP2400 EN rev.1 4/12/01 5:37 PM Page 8
