AUX. IN
AUX. IN
An external (auxiliary) audio source (i.e., personal CD player
or MP3 player) can be connected to this unit and heard through
the speakers.
1) Plug one end of cable into the AUX IN socket on the unit.
2) Plug the other end of the cable into the Headphone or
Line Out socket of the external source.
3) Press the FUNCTION button to select AUX.
Continue to operate CD or MP3 player as usual.
Selections will be heard through the unit's speakers.
(Plug other end into external
source such as an MP3 player.)
Unit will be automatically off after 4.5 hours without further operation.
ADJUSTING THE SOUND
LCD display
VOLUME
VOLUME
The clock is displayed on LCD display at standby mode.
on LCD display at standby mode.
1. Press and hold the PROGRAM / CLOCK-ADJ. button.
2. Press the NEXT or BACK to select 12 hours or 24 hours display.
3. Press the PROGRAM / CLOCK-ADJ. button, the hour digit flash.
the hour digit flash.
4. Press the NEXT or BACK to adjust hour digit.
5. Press the PROGRAM / CLOCK-ADJ. button, the minute digit flash.
6. Press the NEXT or BACK to adjust minute digit.
7. Press the PROGRAM / CLOCK-ADJ. button again, the correct time
is shown on display.
CLOCK ADJUSTMENT
CLOCK-ADJ.
LCD display
POWER
LISTENING TO THE RADIO
1 . Turn on the unit by
pressing the POWER button.
LCD display
LCD display
FUNCTION
FUNCTION
2 .
Press the
FUNCTION
button to select the radio
and
frequency is displayed.
TO ADJUST THE VOLUME
Press the VOLUME button to increase the volume or
VOLUME button to decrease the volume.
STEREO HEADPHONES
For private listening, headphones ( not included ) of not less
than 8 ohms impedance and fitted with a standard 3.5mm
diameter jack plug, may be fitted to the front PHONES
jack. Using headphones automatically switches-off the
loudspeakers.
3 . Tune to a station by pressing and holding the
F-SKIP/UP or
B-SKIP/DOWN button and the
F-SKIP/UP or B-SKIP/DOWN button and the
and the
frequency is displayed.
4 . Release the button as soon as the searching
starts. The tuner will search up or down and stop
at the next receivable station. When scanning
stops, the frequency of the received station will be
displayed.
GB
5
Summary of Contents for RCD400BT
Page 11: ......
