44
Buttons
ON/OFF
–
Turns the modem on or puts it in standby mode. Placing
the cable modem in standby mode (the
“
off
”
position) allows for
continued status monitoring from the cable network.
Do not press
this button when transmitting data over the internet. The
information will be lost and your connection disabled.
Light/LED Indicators
POWER
–
Indicates whether cable modem is in active or standby
mode. The light is off when the modem is in standby mode, and on
when the power is activated.
PC LINK
–
Indicates whether the connection between the computer
and the modem is active (ready to transmit/receive) or actually
transmitting/receiving. The light is off when no carrier is present (or
the modem is in standby mode), on when the carrier is present but
there
’
s no transmit/receive activity, and flashing when there is
transmit/receive activity.
CABLE
–
Indicates the status of your cable connection. The light is off when no
cable connection is detected or the modem is in standby mode and fully lit when
the modem is registered with the network and data can be sent.
ACTIVITY
–
Indicates the existence of data traffic in the cable lines. The light is off
when no data traffic is present and flashing when data activity exists.
–
This light flashes when you have mail. (Check with your service provider to
make sure they offer this feature.)
service information
If you purchased or leased your cable modem directly from your cable company,
then warranty service for the cable modem may be provided through your cable
provider or its authorized representative. For information on 1) Order Service, 2)
Obtaining Customer Support, or 3) Additional Service Information, please contact
your cable company. If you purchased your cable modem from a retailer, see the
enclosed warranty card.
Detach Her
e
✂
Quick Reference
