10
TROUBLESHOOTING GUIDE
Should you experience difficulties in the use of this player, please refer to
the following chart.
Fault Cause Solution
Unit cannot be
operated.
Unit crashes and
“hangs”
Disconnect from the mains for
around 5 seconds. Then switch the
unit on again.
Speaker is not
paired to the audio
source.
Check whether a connection exists.
If necessary, pair the speaker
again to the audio source.
Increase the volume on the
speaker
No audio signal
via the
Bluetooth
connection
Volume too low
Increase the volume on the the
audio source.
Pairing does not
work
Check whether the audio source
supports the A2DP protocol
Audio source is
switched off
Switch on the audio source
Bluetooth is
switched off at the
audio source.
Switch on the Bluetooth function in
the audio source.
Speaker cannot
be connected
Bluetooth version
is not supported.
Use a different playback unit.
Poor sound
quality from a
Bluetooth
®
device
Bluetooth device
is almost out of
range of the
MW-1266
Move your Bluetooth device
closer to the MW-1266
Low battery.
Replace the battery with correct
type CR2032
Remote control
is not
functioning
properly.
Remote Control
is not pointed
to ward the IR
window
Point the Remote Control to ward
the unit IR window, use with in 10
feet of the unit.
