CRKD 2571
First issue 05/04
3
1/2 PAN HEAD SCREW
1 OF 5
DISASSEMBLY
Cover Removal
Note:
Perform all disassembly procedures in the order
presented. When reassembling, use the reverse
procedure. Make sure that all leads/wiring are
routed correctly when reassembling.
1. Remove the screw located on the backside of the unit as shown in Figure 1. Remove seven (7) screws located on the left and right
side of the cover
2. Remove top panel by lifting upward from rear and separating tabs from backside of front plate.
Remove screws
Located on the Back of Unit
Back Panel Removal
1. Remove
cover.
2. Remove thirteen (13) screws from the back of unit as shown in Figure 2.
3. Lift CD tray to release tabs on back panel as shown in Figure 2.
Fig. 2
Fig. 1