Quick Installation Guide for MPC-STD
THOMSON TECHNOLOGY
●
9087A – 198
th
STREET, LANGLEY, BC CANADA V1M 3B1
TELEPHONE: (604) 888-3381
●
EMAIL: [email protected]
●
www.thomsontechnology.com
PM085 REV 1 08/08/28
Connect MPC-STD to Controller/s:
1. Connect the RJ45 end of Cable 1 to the intended Thomson Technology controller. (i.e. MEC20
or TSC800)
2. Connect the MPC-COM1 end of Cable 1 to the MPC-STD port labeled COM1 / PLC1.
Connect MPC-STD to PC:
3. Connect the MPC-COM2 end of Cable 2 to the MPC-STD port labeled COM2 / PLC2.
4. Connect the PC end of Programming cable (Cable 2) to the serial port on the computer.
