THOMSON MCR61TF30, Service Manual

Page: 13 / 48

SERVICE MANUAL
EEPROM AT24C04 (N002)
1. Features
2. Pin Configuration
Data EEPROM internally organized as 512
bytes and 32 pages×16 bytes
Low power CMOS
Vcc=2.7 to 5.5V operation
Two wire serial interface bus
I
2
C-Bus
compatible
Filtered inputs for noise suppression with
Schmitt trigger
Clock frequency up to 400 kHz
High programming flexibility
-Internal programming voltage
-Self timed programming cycle including erase
-Byte-write and page-write programming
between 1 and 16 bytes
-Typical programming time 6 ms(<10ms) for up
to 16 bytes
High reliability
Fig. 6
-Endurance 10
6
cycles
1)
-Data retention 40 years
1)
-ESD protection 4000 V on all pins
8 pin DIP/DSO packages
Available for extended temperature ranges
-Industrial -40 to +85
-Automotive -40 to +125
3. Block Diagram
Fig. 7
4. Refer to Table 4 about Functions and Data of the IC’s Each Pin
11