EN
Advanced Operation
7
General Operation
8
DSP
• Press repeatedly to select among the
DSP modes:
FLAT > BASS > POP > ROCK > JAZZ
Play modes
• Press
MODE
repeatedly during play-
back to switch among the following
playback modes:
Normal playback > Repeat All >
Random > Random repeat
> Program
> Repeat program
> Normal play-
back
Note:
Program and Repeat pro-
gram will only appears if there are
programmed tracks.
Programming Tracks
1. Press and hold
MODE
for 2 seconds in
stop mode to enter program mode. You
will see ‘P’ icon lit representing program
mode, flashing ‘ - -’ for track selection
and ‘P01’ for program list position.
2. Press
Skip backward
or
Skip for-
ward
to select a track. Selected track
number will flash.
Note:
The player will enter Intro Play
mode and play the beginning of each
track as you scroll through tracks for
programming .
3. Press
MODE
to confirm selection.
4. Press
MODE
again to skip to the next
programming position.
5. Repeat steps 2-4 for further selections.
Maximum 20 selections can be made.
6. Press
STOP
to exit programming
mode or unit returns to stop mode auto-
matically after 30 seconds if there is no
key activation.
See section on “Play Modes” to playback
programmed tracks.
Editing program
Overwriting Programmed Tracks
1. In stop mode, press and hold
MODE
to enter program mode.
2. Press
MODE
to select the pro-
grammed track you want to overwrite.
3. Press
Skip backward
or
Skip for-
ward
to select the new track you want
to store.
4. Press
MODE
to confirm selection.
5. Repeat steps 2 and 3 to overwrite
additional programmed tracks.
Deleting Programmed Tracks
1. In stop mode, press and hold
MODE
to enter program mode.
2. Press
MODE
to select the pro-
grammed track to be deleted.
3. Press and hold
DSP
for about 3 sec-
onds to delete unwanted track from
your program list, ‘ - - ‘ will show on dis-
play to indicate successful deletion.
4. Repeat steps 2 and 3 to delete addi-
tional tracks from the program list.
5. To cancel editing program, press
STOP
once , or unit will return to stop
mode automatically after 30 seconds if
there is no key activation.
File Download
When the unit is connected to the com-
puter, will be displayed on the
screen.
During transfer, the icon will flash.
When the transfer is complete, the icon
will remain lit. Do not unplug the USB
cable when the icon is flashing.
NOTE:
See Software Instruction Manual for
instructions to install USB driver , music
management software and to transfer
tracks to player and/or memory card.
PDP2424/PDP2428 IB-EN 10/7/02 4:43 PM Page 14
