THOMSON LDK 23hs mkII, Operator'S Manual

Page: 43 / 70

Location of Controls and Functions Operator's Manual LDK 23HS mkII - HS Camera System 4-11
8
Audio Ch. 2 microphone connector
Balanced input for high quality microphone. A phantom
power supply (48V) can be internally selected (see
installation manual). The gain of this audio channel
can be controlled from the CPU.
9
Headphone volume
This control varies the volume of the production
intercom signal to the cameraman's headset when
the selection switch (5) is in the FRONT position.
1
Intercom routing switch
A 3-position switch which routes the cameraman's
intercom microphone signal to engineering (ENG) or
production (PROD), or turns off the intercom.
If the camera is used in triax mode, the momentary
VTR switch at the front of the camera, on the lens or
on a shot box can be used to route the cameraman's
intercom microphone signal to production regardless
of the position of this switch.
2
Headset Programme volume control
This control varies the volume of the programme
intercom signal to the cameraman's headset.
3
Headset Engineering volume control
This control varies the volume of the engineering
intercom signal to the cameraman's headset.
4
Headset Production volume control
This control varies the volume of the production
intercom signal to the cameraman's headset when
the selection switch (5) is not in the FRONT position.
5
Production volume control selection
A 2-position switch for the production intercom which
selects control of the volume at the front of the
camera (9) or control of the volume at the rear (4).
6
Cameraman intercom connector
Headsets with dynamic or carbon type microphones
can be connected to this socket (see installation
manual).
7
Audio Ch. 1 microphone connector
Balanced input for high quality microphone. A phantom
power supply (48V) can be internally selected (see
installation manual). The gain of this audio channel
can be controlled from the CPU.