EN
11
PAUSE
Viewfinder Adjustment
1
Set the Power Switch to “
” or “
” while pressing
down the Lock Button located on the switch.
2
Pull out the viewfinder fully.
3
Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
Dioptre Adjustment
Control
Power
Switch
CAUTION:
When attaching the camera to a tripod, extend its
legs to stabilise the camcorder. It is not advised to use
small sized tripods. This may cause damage to the
unit by falling over.
Tripod Mounting
1
Align the screw on the tripod with the camera’s
mounting socket. Then tighten the screw.
•Some tripods are not equipped with studs.
Lock Button
Summary of Contents for HP 270
Page 1: ...User manual VMD270...