Transport and standby mode
It is not necessary to switch the keyboard off: it puts itself in standby mode if
not in use.There is therefore no radio transmission in this case. However
when the keyboard is being transported, it is preferable to switch it off so as
to not drain the batteries should a key remain jammed on.
Shutdown :
Press the keyboard’s Connect key and hold down for 7 seconds.The
indicator light will blink 3 times, so confirming the keyboard’s shutdown.
Start-Up :
Press the keyboard’s Connect key.The indicator light will come on.
Note : in the event of functional problems, make sure that the keyboard and RF receiver
are properly synchronised. If necessary, repeat steps 4 and 5 above.
Status and Connect Indicator Lights
• In standby mode : off
• During the synchronisation procedure : blinking
• Working : on (keyboard synchronised)
The numeric keypad
To use the numeric keypad, first press the Num Lock key.
4
Clavier G15IBKB1.qxd 23/08/05 17:12 Page 4
