BVS-1616
Rev. 2
2
1.2 Connection
drawing
Video input section
Video output section
RS-232 port
NCB
Power connector
Configuration
Switch
2 Power connection
Do not connect mains to the desktop power supply before connecting the power supply to the
router.
Connect the DB9 female connector from the desktop power supply to the main unit. Tighten the screws to
assure a proper contact. To connect mains to the desktop power supply you need a mains cord with IEC
320 connector.
The BVS-1616 is normally delivered with the desktop power model
AC ±5V / 30W.
Upon customer
request, BVS-1616 can also be delivered with
DC ±5V / 30W
, which may be fed by a 36 – 72 VDC
mains power source. A Frame mounted power supply solution is also available.
Please refer to the latest Triton Product Catalogue for power supply types, or call Thomson Grass Valley
for this information.
If any third party power supply is used the BVS-1616 router requires ±5V DC with a minimum current of
800mA. The following pin-out is used on the DB9 male power connector:
Pin
1
0V
Pin
2
+5V
Pin
6
-5V
1
Network Control Bus. The protocol of this bus is equal, and compatible to the MIDI bus protocol.
Summary of Contents for Grass Valley Triton TTN-BVS-1616
Page 8: ......
