KAM-HD-MULTI—Instruction Manual
13
Installation
Figure 4. 2000T3NG Kameleon Frame, Front Slots
Figure 5. 2000T1DNG Kameleon Frame Front Slot
6.
With the component side up, insert the front media module in the
corresponding front slot (see
7.
Verify that the module connector seats properly against the midplane
and rear module connector.
8.
Press firmly on both ejector tabs to seat the module.
Figure 6. Installing Front Media Module
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(15)
(13)
(1)
8173-04r1
Network Slot (13)
Reference Distribution Slot (15)
Main Power Supply Slot (18)
Secondary Power
Supply Slot (20)
Front Media Slots (1-12)
Fan Sled
Slot (19)
(2)
(3)
(4)
(5)
(6)
(1)
8039-21
Network Slot (5)
Power Supply Slot (7)
Front Media Slots (1-4)
Reference Distribution Slot (6)
Alignment post and receptacle
8024-06r2
2000 Frame (front view)
Board edge
guides
Board edge
guides
