336
Kalypso Reference Manual
Section 3 — Menus
Note
Incoming levels above clip hi and below clip low will not affect the output
color, making large areas of the screen a fixed color. These controls should
remain set to defaults unless the operator wants to restrict the range of
incoming luminance levels that affect the output.
Figure 231. PseudoColor – Hue Rotation Controls
Hue Rotation
) adjusts the hue angle in degrees ranging from -179
to +180. Clockwise rotation of the soft knob decreases the value. This soft
knob control also appears on the Proc Amp menu, but is only active in
either location when Hue Rotation is turned on from this menu. Though
Hue Rotation is conceptually a Proc Amp control, the Kalypso system actu-
ally uses Pseudocolor circuitry to perform Hue Rotation. The Pseudocolor
Hue Rotation circuitry must be turned on before the feature can be used in
either menu.
Hue Rotation
is turned on and off only from this menu, using the
ON
button.
