Kalypso Reference Manual
119
4-M/E Main Panel
Effects Edit Subpanel
The Effects Edit subpanel contains two work buffer buttons that can be
used to return the system to a known state (
Figure 72. Effects Edit Subpanel
Clear Work Buffer Button
As an operator recalls E-MEM effects and makes changes to the panel and
menu controls, the contents of the work buffer change accordingly. If
source memory is on, the source memory settings for each source are also
updated as the settings for sources modified. The
Clear Wk Bfr
can be used to
return work buffer and source memory settings to known states. This can
be helpful when creating effects.
Work buffer and source memory values are not set to zero when they are
cleared. Instead, previously defined settings replace the current settings.
The Default Keyframe is a single group of settings defining a particular
switcher state. These settings are copied to the work buffer when the work
buffer is cleared. The Default Source Memory defines settings for each
source. These settings are used when the source memory is cleared.
0618_02_09_r0
Effects Edit
Part
Part’l
KF
KF
Const
Const
Dur
Dur
Prev
Prev
KF
KF
Clear
Clear
WkBfr
WkBfr
Next
Next
KF
KF
Rest
Rest
WkBfr
WkBfr
End
End
Begin
Begin
Cut
Cut
Delete
Delete
Paste
Paste
Copy
Copy
Insert
Insert
After
After
Insert
Insert
Before
Before
Clear
Clear
Marks
Marks
Mark
Mark
Block
Block
Mark
Mark
Mod
Mod
MdAll
MdAll
Time
Time
Crsr
Crsr
Edit
Edit
Crsr
Crsr
Effects Edit
Subpanel
Timeline
Navigation
Button Group
(4)
Timeline Edit
Button Group
(4)
Marking
Button Group
(3)
Mode
Selection
(2)
Cursor
Button Group
(2)
Timeline
Modify, Insert
Button Group
(3)
Work Buffer
Button Group
(2)
