EN-19
SPEED
•
Press this button in stand-by mode or during working process
(except under some auto programs which the speed adjustment
function is locked), the appliance
gets into speed setting
mode. The signal on LCD flicker,
then speed is adjustable.
Turn the knob to select desired
speed.
•
Speed range from level 1-10.
•
Press this button in blending & heating process, if the temperature
setting or the actual temperature is over 60°C, the speed can be
only adjustable from speed 1 to 4. If it was working at high speed, it
will drop to speed 4 automatically.
•
There is a speed transfer on the structure, so it's normal to hear little
noise before the motor start working, or transferring the speed
between level 5 and level 6.
•
For crushing or chopping hard food or big volume of food, it is
suggested to select speed 5 first and then turn to speed 10, to
avoid vibration and achieve perfect performance.
TEMPERATURE
•
Press this button in stand-by mode or during heating process
(except some auto programs locked the temperature adjustment),
the appliance gets into temperature setting mode. The signal on
LCD flicker, then temperature is adjustable. Turn the knob
to
select desired temperature.
•
Temperature range: 37-120°C
DIY
•
There are three DIY programs, as to record memories for future use.
•
Press this button, and the signal
on LCD starts flicker. Press
again, it will be selecting
among. For
Recording: When the DIY signal on LCD flickers, press and hold DIY
button for 5 seconds, until the screen shows STEP:01( )and can set
the desired program. The original recording is cleared in the
meantime. Set desired speed, temperature, timer and press DIY
button again, it comes to STEP:02 (
); repeat until finish
setting, up to maximum STEP:20. It cannot come to next step if
there is the time is 00:00:00. Hold DIY button again for 5 seconds to
keep the setting in memory.The recording cannot be reviewed or
revised.
•
For using: Press DIY and select the desired DIY function, and press
START to start working as recorded.
•
During working of DIY program, the machine will stop for 10 seconds
and keep beeping to remind if it needs PAUSE and add ingredients.
If no operation during these 10 seconds, the machine goes to next
step according to the setting.
